plone

freepbx-module-asterisk-cli-2.11.0.0-1.lbn13.noarch
Provides an interface allowing you to run a command as if it was typed into Asterisk CLI
Located in LBN / … / VoIP / BastionLinux 13
freepbx-module-asteriskinfo-2.11.0.2-1.lbn13.noarch
Provides a snapshot of the current Asterisk configuration
Located in LBN / … / VoIP / BastionLinux 13
freepbx-module-dictate-2.11.0.1-1.lbn13.noarch
This uses the app_dictate module of Asterisk to let users record dictate into their phones. When complete, the dictations can be emailed to an email address specified in the extension page
Located in LBN / … / VoIP / BastionLinux 13
freepbx-module-fw_fop-2.11.0.3-1.lbn13.noarch
This module provides the original FOP (Flash Operator Panel) which is known to have issues on Asterisk 1.8 and is no longer supported in favor of FOP2. This module is known to have issues on Asterisk 1.8 and in general is no longer supported in favor of FOP2 available from the original author. The FreePBX team has very little knowledge or expertise on FOP and as a result is not in a position to provide much support
Located in LBN / … / VoIP / BastionLinux 13
freepbx-module-iaxsettings-2.11.0.0-1.lbn13.noarch
Use to configure Various Asterisk IAX Settings in the General section of iax.conf. The module assumes Asterisk version 1.4 or higher. Some settings may not exist in Asterisk 1.2 and will be ignored by Asterisk.
Located in LBN / … / VoIP / BastionLinux 13
freepbx-module-sipsettings-2.11.0.7-1.lbn13.noarch
Use to configure Various Asterisk SIP Settings in the General section of sip.conf. Also includes an auto-configuration tool to determine NAT settings.
Located in LBN / … / VoIP / BastionLinux 13
ZenPacks.AndreaConsadori.Asterisk16-5.0.5_3.0-2.lbn19.noarch
This Monitoring ZenPack provides SNMP-based monitoring for Asterisk 1.6
Located in LBN / … / Zenoss 5 / BastionLinux 19
ZenPacks.lbn.Asterisk-5.0.5_4.0.1-3.lbn19.noarch
This ZenPack monitors Asterisk VoIP server's using SNMP. The following MIB's are monitored: Active Calls 1.3.6.1.4.1.22736.1.2.5.0 Agent 1.3.6.1.4.1.22736.1.5.4.1.7.5 Bridge 1.3.6.1.4.1.22736.1.5.4.1.7.1 Calls Processed 1.3.6.1.4.1.22736.1.2.6.0 Current Channels Used 1.3.6.1.4.1.22736.1.5.1.0 IAX2 1.3.6.1.4.1.22736.1.5.4.1.7.4 Local 1.3.6.1.4.1.22736.1.5.4.1.7.10 MGCP 1.3.6.1.4.1.22736.1.5.4.1.7.8 Phone 1.3.6.1.4.1.22736.1.5.4.1.7.3 SIP 1.3.6.1.4.1.22736.1.5.4.1.7.6 USTM 1.3.6.1.4.1.22736.1.5.4.1.7.2 Woomera 1.3.6.1.4.1.22736.1.5.4.1.7.9 A full list of possible MIB's to extend your monitoring is available at http://wiki.squid-cache.org/Features/Snmp To use this zenpack, you'll need to install the asterisk-snmp server on your Asterisk box. You'll also want to either run up Asterisk as root to bind to port 161 as a standalone SNMP daemon (not recommended), or configure AgentX within your snmpd (recommended), using a configuration as follows in /etc/snmp/snmpd.conf: master agentx agentXPerms 0660 0550 nobody asterisk A full list of Asterisk MIB definitions can be found at https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions
Located in LBN / … / Zenoss 5 / BastionLinux 19
ZenPacks.lbn.Asterisk-client-5.0.5_4.0.1-3.lbn19.noarch
Configuration for any server being monitored by Zenoss/Asterisk
Located in LBN / … / Zenoss 5 / BastionLinux 19
asterisk-18.4.0-1.fc36.5.x86_64 Located in LBN / … / VoIP / BastionLinux 36

« Previous 10 items Next 10 items » 1 ... 45 46 47 48 49 50 51 ... 58

Sections

Search results for asterisk


	Copyright © 2000-2024 Corporation of Balclutha Inc. All rights reserved.