plone

ZenPacks.oie.KannelMonitor-3.2.1_3.0.0-3.lbn13.noarch
KannelMonitor ------------- KannelMonitor uses the nagios check-kannel plugin to retrieve input queue and delivery volumes from any Kannel-based SMPP server. Once your Kannel Server has the check-kannel plugin installed, you can add Kannel monitoring to the device within Zenoss by simply binding the KannelMonitor template to the device. 1. Navigate to the device in the Zenoss web interface. 2. Click the device menu, choose More then Templates. 3. Click the templates menu, choose Bind Templates. 4. Ctrl-click the KannelMonitor template from /Devices/Server to choose it. 5. Click OK. You will now be collecting the Kannel Server metrics from this device.
Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss-1.0.0-1.lbn13.noarch
Zenoss ZenPack module
Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss.ApacheMonitor-3.2.1_2.1.2-1.lbn13.noarch
ApacheMonitor ------------- ApacheMonitor provides a method for pulling performance metrics from the Apache HTTP Server (http://httpd.apache.org/) directly into Zenoss without requiring the use of an agent. This is accomplished by utilizing the standard mod_status module that comes with version 1 and 2 of the HTTP server. The following metrics will be collected and graphed for the Apache HTTP Server. * Requests per Second * Throughput (Bytes/sec & Bytes/request) * CPU Utilization of the HTTP server and all worker processes/threads * Slot Usage (Open, Waiting, Reading Request, Sending Reply, Keep-Alive, DNS Lookup and Logging) Follow these steps to setup your HTTP server so that it will allow Zenoss to access the server status. 1. On the Apache server, find your httpd.conf file. This is normally located in /etc/httpd/httpd.conf or /etc/httpd/conf/httpd.conf. Other locations are possible depending on your operating system and setup. 2. Turn the ExtendedStatus option on in the httpd.conf file. This option will typically be commented out. You can enable it by uncommenting it. ... becomes ... ExtendedStatus on 3. Enable the /server-status location in the httpd.conf file. This is another option that typically already exists but is commented out. ... becomes ... <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from zenoss.yourdomain.com </Location> 4. Save the httpd.conf file with these changes then restart httpd. This can normally be accomplished with following command. apachectl restart Once your Apache HTTP Server is configured to allow Zenoss to access the extended status, you can add Apache monitoring to the device within Zenoss by simply binding the Apache template to the device. 1. Navigate to the device in the Zenoss web interface. 2. Click the device menu, choose More then Templates. 3. Click the templates menu, choose Bind Templates. 4. Ctrl-click the Apache template from /Devices/Server to choose it. 5. Click OK. You will now be collecting the Apache HTTP Server metrics from this device.
Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss.DellMonitor-3.2.1_2.1.0-1.lbn13.noarch
DellMonitor provides custom modeling of devices running the Dell OpenManage agents. It also contains hardware identification for Dell proprietary hardware. The information is collected through the SNMP interface. The following information is modeled. * Hardware Model * Hardware Serial Number * Operating System * CPU Information (socket, speed, cache, voltage) * PCI Card Information (manufacturer, model)
Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss.DigMonitor-3.2.1_1.0.2-1.lbn13.noarch Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss.DnsMonitor-3.2.1_2.0.2-1.lbn13.noarch Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss.EsxTop-3.2.1_1.0.3-1.lbn13.noarch
The VMWare ESX Server ZenPack for Core allows you to monitor ESX hosts and guests via VMWares EsxTop utility. The ZenPack uses the resxtop command to gather performance information about VMware Infrastructure ESX servers.
Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss.FtpMonitor-3.2.1_1.0.2-1.lbn13.noarch Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss.HPMonitor-3.2.1_2.1.0-1.lbn13.noarch
HPMonitor provides custom modeling of devices running the HP/Compaq Insight Management Agents. It also contains hardware identification for HP proprietary hardware. The information is collected through the SNMP interface. The following information is modeled. * Hardware Model * Hardware Serial Number * Operating System * CPU Information (socket, speed, cache)
Located in LBN / … / Network Monitoring / BastionLinux 13
ZenPacks.zenoss.HttpMonitor-3.2.1_2.0.3-1.lbn13.noarch
ZenPacks.zenoss.HttpMonitor monitors connection response time to an HTTP server and determines whether specific content exists on a Web page.
Located in LBN / … / Network Monitoring / BastionLinux 13

« Previous 10 items Next 10 items » 1 ... 40 41 42 43 44 45 46 ... 63

Sections

Search results for zenoss


	Copyright © 2000-2024 Corporation of Balclutha Inc. All rights reserved.