-
ZenPacks.community.VMwareESXiMonitor-4.2.5_2.0.1-1.lbn25.noarch
DESCRIPTION:
This ZenPack allows Zenoss to monitor VMware ESXi Hosts and VMs via the vSphere SDK for Perl. It creates the /Server/VMware/ESXi Device Class. All ESXi Hosts have to be added to this Device Class.
INSTALLATION:
First install the vSphere SDK for Perl on your Zenoss Collector Server. After that you can install the ZenPack as usually and restart Zenoss.
ZPROPERTIES:
The ZenPack will add two zProperties:
zVSphereUsername: Name of a User that has read-only access to the ESXi Host
zVSpherePassword: The corresponding Password
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 25
-
ZenPacks.community.VMwareESXiMonitor-4.2.5_2.0.1-1.lbn25.noarch
DESCRIPTION:
This ZenPack allows Zenoss to monitor VMware ESXi Hosts and VMs via the vSphere SDK for Perl. It creates the /Server/VMware/ESXi Device Class. All ESXi Hosts have to be added to this Device Class.
INSTALLATION:
First install the vSphere SDK for Perl on your Zenoss Collector Server. After that you can install the ZenPack as usually and restart Zenoss.
ZPROPERTIES:
The ZenPack will add two zProperties:
zVSphereUsername: Name of a User that has read-only access to the ESXi Host
zVSpherePassword: The corresponding Password
Located in
LBN
/
…
/
Network Monitoring
/
BastionLinux 25
-
ZenPacks.lbn.Asterisk-4.2.5_4.0.1-3.lbn13.noarch
This ZenPack monitors Asterisk VoIP server's using SNMP. The following MIB's are monitored:
Active Calls 1.3.6.1.4.1.22736.1.2.5.0
Agent 1.3.6.1.4.1.22736.1.5.4.1.7.5
Bridge 1.3.6.1.4.1.22736.1.5.4.1.7.1
Calls Processed 1.3.6.1.4.1.22736.1.2.6.0
Current Channels Used 1.3.6.1.4.1.22736.1.5.1.0
IAX2 1.3.6.1.4.1.22736.1.5.4.1.7.4
Local 1.3.6.1.4.1.22736.1.5.4.1.7.10
MGCP 1.3.6.1.4.1.22736.1.5.4.1.7.8
Phone 1.3.6.1.4.1.22736.1.5.4.1.7.3
SIP 1.3.6.1.4.1.22736.1.5.4.1.7.6
USTM 1.3.6.1.4.1.22736.1.5.4.1.7.2
Woomera 1.3.6.1.4.1.22736.1.5.4.1.7.9
A full list of possible MIB's to extend your monitoring is available at
http://wiki.squid-cache.org/Features/Snmp
To use this zenpack, you'll need to install the asterisk-snmp server on your Asterisk box.
You'll also want to either run up Asterisk as root to bind to port 161 as a standalone SNMP
daemon (not recommended), or configure AgentX within your snmpd (recommended), using a
configuration as follows in /etc/snmp/snmpd.conf:
master agentx
agentXPerms 0660 0550 nobody asterisk
A full list of Asterisk MIB definitions can be found at https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.lbn.Asterisk-4.2.5_4.0.1-3.lbn19.noarch
This ZenPack monitors Asterisk VoIP server's using SNMP. The following MIB's are monitored:
Active Calls 1.3.6.1.4.1.22736.1.2.5.0
Agent 1.3.6.1.4.1.22736.1.5.4.1.7.5
Bridge 1.3.6.1.4.1.22736.1.5.4.1.7.1
Calls Processed 1.3.6.1.4.1.22736.1.2.6.0
Current Channels Used 1.3.6.1.4.1.22736.1.5.1.0
IAX2 1.3.6.1.4.1.22736.1.5.4.1.7.4
Local 1.3.6.1.4.1.22736.1.5.4.1.7.10
MGCP 1.3.6.1.4.1.22736.1.5.4.1.7.8
Phone 1.3.6.1.4.1.22736.1.5.4.1.7.3
SIP 1.3.6.1.4.1.22736.1.5.4.1.7.6
USTM 1.3.6.1.4.1.22736.1.5.4.1.7.2
Woomera 1.3.6.1.4.1.22736.1.5.4.1.7.9
A full list of possible MIB's to extend your monitoring is available at
http://wiki.squid-cache.org/Features/Snmp
To use this zenpack, you'll need to install the asterisk-snmp server on your Asterisk box.
You'll also want to either run up Asterisk as root to bind to port 161 as a standalone SNMP
daemon (not recommended), or configure AgentX within your snmpd (recommended), using a
configuration as follows in /etc/snmp/snmpd.conf:
master agentx
agentXPerms 0660 0550 nobody asterisk
A full list of Asterisk MIB definitions can be found at https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions
Located in
LBN
/
…
/
Network Monitoring
/
BastionLinux 19
-
ZenPacks.lbn.Asterisk-4.2.5_4.0.1-3.lbn19.noarch
This ZenPack monitors Asterisk VoIP server's using SNMP. The following MIB's are monitored:
Active Calls 1.3.6.1.4.1.22736.1.2.5.0
Agent 1.3.6.1.4.1.22736.1.5.4.1.7.5
Bridge 1.3.6.1.4.1.22736.1.5.4.1.7.1
Calls Processed 1.3.6.1.4.1.22736.1.2.6.0
Current Channels Used 1.3.6.1.4.1.22736.1.5.1.0
IAX2 1.3.6.1.4.1.22736.1.5.4.1.7.4
Local 1.3.6.1.4.1.22736.1.5.4.1.7.10
MGCP 1.3.6.1.4.1.22736.1.5.4.1.7.8
Phone 1.3.6.1.4.1.22736.1.5.4.1.7.3
SIP 1.3.6.1.4.1.22736.1.5.4.1.7.6
USTM 1.3.6.1.4.1.22736.1.5.4.1.7.2
Woomera 1.3.6.1.4.1.22736.1.5.4.1.7.9
A full list of possible MIB's to extend your monitoring is available at
http://wiki.squid-cache.org/Features/Snmp
To use this zenpack, you'll need to install the asterisk-snmp server on your Asterisk box.
You'll also want to either run up Asterisk as root to bind to port 161 as a standalone SNMP
daemon (not recommended), or configure AgentX within your snmpd (recommended), using a
configuration as follows in /etc/snmp/snmpd.conf:
master agentx
agentXPerms 0660 0550 nobody asterisk
A full list of Asterisk MIB definitions can be found at https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 19
-
ZenPacks.lbn.Asterisk-5.0.5_4.0.1-3.lbn19.noarch
This ZenPack monitors Asterisk VoIP server's using SNMP. The following MIB's are monitored:
Active Calls 1.3.6.1.4.1.22736.1.2.5.0
Agent 1.3.6.1.4.1.22736.1.5.4.1.7.5
Bridge 1.3.6.1.4.1.22736.1.5.4.1.7.1
Calls Processed 1.3.6.1.4.1.22736.1.2.6.0
Current Channels Used 1.3.6.1.4.1.22736.1.5.1.0
IAX2 1.3.6.1.4.1.22736.1.5.4.1.7.4
Local 1.3.6.1.4.1.22736.1.5.4.1.7.10
MGCP 1.3.6.1.4.1.22736.1.5.4.1.7.8
Phone 1.3.6.1.4.1.22736.1.5.4.1.7.3
SIP 1.3.6.1.4.1.22736.1.5.4.1.7.6
USTM 1.3.6.1.4.1.22736.1.5.4.1.7.2
Woomera 1.3.6.1.4.1.22736.1.5.4.1.7.9
A full list of possible MIB's to extend your monitoring is available at
http://wiki.squid-cache.org/Features/Snmp
To use this zenpack, you'll need to install the asterisk-snmp server on your Asterisk box.
You'll also want to either run up Asterisk as root to bind to port 161 as a standalone SNMP
daemon (not recommended), or configure AgentX within your snmpd (recommended), using a
configuration as follows in /etc/snmp/snmpd.conf:
master agentx
agentXPerms 0660 0550 nobody asterisk
A full list of Asterisk MIB definitions can be found at https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions
Located in
LBN
/
…
/
Zenoss 5
/
BastionLinux 19
-
ZenPacks.lbn.Base-3.2.1_3.0.1-5.lbn13.noarch
Last Bastion Network product information into your Zenoss Server, and all
the necessary monkey patches to your Zope environment.
Located in
LBN
/
…
/
Network Monitoring
/
BastionLinux 13
-
ZenPacks.lbn.Base-4.2.5_4.0.3-2.lbn13.noarch
Last Bastion Network product information into your Zenoss Server, and all
the necessary monkey patches to your Zope environment.
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.lbn.Base-4.2.5_4.0.3-3.lbn19.noarch
Last Bastion Network product information into your Zenoss Server, and all
the necessary monkey patches to your Zope environment.
Located in
LBN
/
…
/
Network Monitoring
/
BastionLinux 19
-
ZenPacks.lbn.Base-4.2.5_4.0.3-3.lbn19.noarch
Last Bastion Network product information into your Zenoss Server, and all
the necessary monkey patches to your Zope environment.
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 19
