You are here: Home

Modified items

All recently modified items, latest first.
RPMPackage ZenPacks.community.puppet-4.2.5_1.21-1.lbn13.noarch
This ZenPack provides support for the following in Puppet (via ssh) Report and listing of puppet clients for each master on a separate tab Report of all puppet clients in a PuppetClientList report Tracking of update times of clients Device addition from puppet via events The ZenPack provides a device class /Server/PuppetMaster, with a collector plugin PuppetModeler.
RPMPackage ZenPacks.community.libvirt-4.2.5_1.97-1.lbn13.noarch
This ZenPack leverages the libvirt API for monitoring virtualization servers (e.g. XEN, KVM, etc...). This uses the system python and libvirt python API to monitor various virtualization platforms remotely. It provides a /Server/libvirtHost device class and this module is tested using ssh as a transport for the libvirt API, it could be made to use TLS or TCP with further development. It provides a libvirtvirtualHostlist report as well. You can set zLibvirtUsername and zLibvirtConnectType to customize access to the hosts, though only qemu+ssh:// was tested at the moment. libvirt supports: * The Xen hypervisor on Linux and Solaris hosts. * The QEMU emulator * The KVM Linux hypervisor * The LXC Linux container system * The OpenVZ Linux container system * The User Mode Linux paravirtualized kernel * The VirtualBox hypervisor * The VMware ESX and GSX hypervisors * Storage on IDE/SCSI/USB disks, FibreChannel, LVM, iSCSI, NFS and filesystems
RPMPackage ZenPacks.community.f5-4.2.5_1.7-1.lbn13.noarch
The ZenPack has the following: /Network/f5 Device Class A Device template which graphs many of the same performance stats as would be seen in the Overview >> Performance section of the 10.x UI Virtual Server Component Modeling A component template for virtual servers. Virtual Server filtering. This pack adds a new zProperty, zF5BigipVirtualServerNameFilter, which when set will limit which virtual servers are included during a modeling cycle. Node Component Modeling A component template for nodes. Node filtering. This pack adds a new zProperty, zF5BigipNodesNameFilter, which when set will limit which nodes are included during a modeling cycle. Pool Component Modeling A component template for Pools. Pool filtering. This pack adds a new zProperty, zF5BigipPoolsNameFilter, which when set will limit which pools are included during a modeling cycle.
RPMPackage ZenPacks.community.Varnish3-4.2.5_1.2-1.lbn13.noarch
A ZenPack to provide support for Varnish version 3.x metrics. It introduces a new command parser that is intended to be run over SSH. Metrics are parsed from the output of the varnishstat command on the Varnish 3.x server
RPMPackage ZenPacks.community.SuSE-4.2.5_1.1-1.lbn13.noarch
This SSH-based ZenPack extends the Linux Monitor and Linux Monitor AddOn ZenPacks to provide additional functionality for SuSE Linux, specifically OS Make and Software inventory.
RPMPackage ZenPacks.community.Splunk-4.2.5_1.1.1-2.lbn13.noarch
This ZenPack allows Splunk alerts to be sent to Zenoss as alerts; escalation can then be handled with Zenoss alerts.
RPMPackage ZenPacks.community.SQLDataSource-4.2.5_1.99-2.lbn13.noarch
This Functionality ZenPack provides a new zenperfsql daemon and SQL data source. It based on Twisted twisted.enterprise.adbapi interface to the standardized DB-API 2.0 API, which allows you to access a number of different RDBMSes.
RPMPackage ZenPacks.community.RDBMS-4.2.5_2.5-1.lbn13.noarch
This ZenPack provides basic "Database" and "DBSrvInst" component class.
RPMPackage ZenPacks.community.OracleMon-4.2.5_1.2-1.lbn13.noarch
This Monitoring ZenPack provides Oracle Database monitoring. There is a community.sql.OracleDatabaseMap zCollectorPlugin that the device will need to use.
RPMPackage ZenPacks.community.LinuxMonitorAddOn-4.2.5_1.0-1.lbn13.noarch
This SSH-based ZenPack supplements the Linux Monitor ZenPack and provides perf monitoring for Interfaces and adds routing and memory as well.
RPMPackage ZenPacks.community.HPUXMonitor-4.2.5_2.2-2.lbn13.noarch
HPUX SNMP-based monitoring/coordination
RPMPackage ZenPacks.community.Fortigate-4.2.4_1.2.1-1.lbn13.noarch
Provides a /Network/Router/Firewall/Fortigate Device Class and a Fortigate template that can be \ bound to monitor CPU usage, Memory Utilization and Number of Sessions for a Fortigate Firewall.
RPMPackage ZenPacks.community.DistributedCollectors-4.2.5_2.0.1-1.lbn13.noarch
Description: This ZenPack provides UI for configuring multiple collectors with Zenoss Core. It implement remote collector configuration method described in How to install distributed collectors manual (http://community.zenoss.org/docs/DOC-2496). Adding Remote Collector 1. install DistributedCollectors ZenPack on master server 2. install Zenoss on remote collector without any ZenPacks 3. configure "ssh public key authentication" on remote collector for user 'zenoss' 4. in "Collectors" -> select menu item "Add Remote Monitor..." and enter name or ip address of remote collector Updating Remote Collectors (after zenpacks install or remove) 1. in "Collectors" select all remote collectors you want update. 2. in "Collectors" -> select menu item "Update Remote Monitors..."
RPMPackage ZenPacks.community.CiscoEnvMon-4.2.5_1.1-1.lbn13.noarch
Cisco Environmental monitoring including fans, temperature sensors, power supplies and expansion modules.
RPMPackage ZenPacks.chudler.GoogleAppEngine-4.2.5_1.0-1.lbn13.noarch
With this ZenPack you can monitor the status of your Google AppEngine applications. It provides: All Quota statistics (allowances, percent used, and raw used). Application status (version deployed) Monitoring of multiple google accounts Automatic detection of new quotas types Automatic detection of new applications and changes to existing applications
RPMPackage ZenPacks.atelepin.cbCiscoQOS-4.2.5_1.2-1.lbn13.noarch
Background ========== This project is a Zenoss extension (ZenPack) primarily intended for ISPs which extensively use different QoS on their network (like MPLS), and need to know statistics by each class. About Cisco Base QOS on Cisco site This is prerelease but all main functionality work. Almost think i need change or add write in the code as TODO or FIXME Overview ======== Because ServicePolicy bound to Interface (IpInterface), installation create additional relation between cbServicePolicy and IpInterface. ZenPack contain automated modeler which grab QOS Object configuration from device. From this configuration modeler create particular class instance and create hierarchy of that objects (see more about nested object in cisco site). In this release i collect only two statistic item PostPolicyBitRate and PostPolicyDropRate. From code point of view each statistic item is different component, but from user point of view, this item belong to cbServicePolicy and statistics should be visible as single item (for example on single graph). In this case cbServicePolicy work not only as container but also provide internal API to gather statistic from his child.
RPMPackage ZenPacks.ZenSystems.ApcUps-4.2.4_1.2-6.lbn13.noarch
The ZenPack has the following Device Class /Devices/Server/Windows Components are: ApcUpsBattery which has details for: Various elements of battery status Modeler plugins are: ApcUpsDeviceMap Gathers Hardware and Software manufacturer and product Serial number Total number of battery packs Number of bad battery packs Basic output status ApcUpsBatteryMap Gathers battery data for status Time on battery Battery last replacement date Battery replacement indicator Device template ApcUps provides device-level performance information: Data Sources Voltage Current Remaining capacity and time Temperature Thresholds Low capacity Low time remaining High temperature Graph Definitions Voltage Current Remaining capacity Remaining time Temperature Device template ApcUpsInsAndOuts provides specific input / output performance information: Data Sources Input frequency and voltage Output frequency, voltage, load and current Thresholds High load Graph Definitions Input frequency and voltage Output frequency, voltage, load and current A separate APC UPS Information menu delivers tabular and graphical information for the overall device
RPMPackage ZenPacks.TwoNMS.PrinterMIB-4.2.5_2.0.0-2.lbn13.noarch
This ZenPack monitors printers supporting the new RFC3805 PrinterMIB (supersedes RFC1759). Version 2.0.0 creates separate components for toners, supplies and input trays. In case you don't see the Printer components then try deleting the printer + adding it directly to the /Printer/PrinterMIB tree.
RPMPackage ZenPacks.RomanTykhonov.OracleDB-4.2.5_2.0-2.lbn13.noarch
With SNMP Trap destination setup in Oracle Enterprise Manager it is the best way to monitor many Oracle Single Instance/RACs for FREE. (if you have Oracle Standard Edition - Perfomance Tab have to be disabled due to Standard Edition Licence Agreement)
RPMPackage ZenPacks.PlixerInternational.Scrutinizer-4.2.4_1.2-1.lbn13.noarch
The Scrutinizer ZenPack provides direct integration between Zenoss and Scrutinizer. This integration allows network engineers to quickly switch between viewing the event details in Zenoss and the detailed network traffic analysis view in Scrutinizer. Network engineers need to quickly find and resolve network performance bottlenecks before they impact customers and end-users. One of the most effective ways to diagnose network performance problems is by analyzing NetFlow data.